TECHNOL ALIPHATIC POLYESTER POLYOLS : In Polyurethane Application Segment, TECHNOL Aliphatic polyester polyols are mainly used in order to improve elastomeric properties in the molecular structure. The application areas covered by TECHNOL Aliphatic saturated polyesters are : Flexible Slabstock Foams, Integral Skin Foam, Microcellular elastomers, Thermoplastic polyurethane(TPU), Synthetic leather, Polyurethane dispersion coating, Adhesives and Sealants.
| Technol Grades | Adhesives | Synthetic Leather | Microcellular Foams | Flexible Foams | TPU | Coatings | PU Dispersion |
Hydroxyl No., Mg Koh/g | Acid Value, Mg Koh/g | Viscosity in CPS | Average MW | Key Applications |
| 2255 | • | 55-59 | ≤ 1.0 | 35°C | 4200-5000 | 2000 | Footwear | |||||
| 2250 | • | 50-55 | < 0.8 | 35°C | 4500-5500 | 2150 | Footwear | |||||
| 3272 | • | • | 70-75 | < 0.8 | 35°C | 2000-4000 | 1550 | Low density high hardness footwear sandal | ||||
| 1255B | • | • | • | 54-58 | < 0.5 | 50°C | 2000-2500 | 2050 | TPU Resins & Footwear | |||
| 3255B | • | • | • | 54-58 | < 1.0 | 35°C | 6000-7000 | 2000 | Medium hydrolysis Improved performance of TPU Resins & Footwear | |||
| 3160R | • | 58-63 | <1.50 | 25°C | 16000-19000 | 2500 | Flexible foam | |||||
| 3160RLF | • | 58-63 | <1.50 | 35°C | 8500-10000 | 2500 | Low Fogging characteristics Flexible foam | |||||
| 3160 | • | • | 58-63 | <1.60 | 25°C | 19000-24000 | 2580 | Footwear, Flexible foam & Hot Cast Elastomer | ||||
| 2245T | • | 44-48 | < 1.0 | 35°C | 6800-7800 | 2600 | Footwear | |||||
| 2265T | • | 64-68 | < 1.0 | 35°C | 4000-4600 | 2000 | Footwear | |||||
| 1165DB | • | 60-68 | <1.0 | 35°C | 9400-12000 | 2010 | Footwear | |||||
| 4050T | • | 54-58 | <1.0 | 35°C | 7600-8600 | 2100 | Footwear | |||||
| 3255AX | • | 50-58 | <1.80 | 35°C | 9500-11000 | 2700 | Improved Anti scorching for Flexible slab-stock foam | |||||
| 4255AX | • | 50-58 | <1.0 | 25°C | 14000-16000 | 3000 | Improved hydrolysis and anti scorhing version for Flexible slab-stock foam | |||||
| 6182AX | • | 80-85 | <1.0 | 25°C | 6500-8500 | 2000 | Improved hydrolysis and anti scorhing version for Flexible slab-stock foam | |||||
| 3196AX | • | 195-215 | <4.0 | 25°C | 18500-27500 | 830 | Flexible slab stock foam | |||||
| 8175 | • | 160-180 | <0.8 | 25°C | 2500-4500 | 660 | Flexible slab stock foam flame lamination | |||||
| 2120B | • | • | • | 108-116 | < 0.5 | 75°C | 100-300 | 1000 | TPU Resins | |||
| 2156B | • | • | • | 50-55 | < 0.5 | 60°C | 1350-1650 | 2250 | TPU Resins | |||
| 2140B | • | • | • | 38-42 | < 0.5 | 60°C | 2700-3300 | 2800 | Adhesives and TPU | |||
| 1156 | • | • | 54-58 | ≤ 1.0 | 75°C | 500-700 | 2000 | TPU, synthetic leather | ||||
| 4055 | • | • | 54-58 | <0.7 | 35°C | 2900-3600 | 2000 | Footwear | ||||
| 4055NP | • | • | 55-60 | <0.5 | 35°C | 1500-3500 | 2000 | CASE , Dispersions, UV stable | ||||
| 4256NH | • | • | 53-57 | <0.5 | 60°C | 6000-8000 | 2000 | Coatings, adhesives and PUD | ||||
| 4310NH | • | • | 106-118 | <1.0 | 75°C | 500-800 | 1200 | Coatings, adhesives and PUD | ||||
| 5255MPD | • | • | 55-60 | <1.0 | 35°C | 2500-400 | 2000 | Excellent hydrolysis in Coatings, adhesives and PUD & micro cellular | ||||
| 5255PO | • | • | 55-60 | <1.0 | 35°C | 7000-8000 | 2000 | Excellent hydrolysis in Coatings, adhesives & PUD and micro cellular | ||||
| 6113 | • | • | • | 55-60 | <1.0 | 35°C | 7000-8000 | 2000 | Medium hydrolysis in Coatings, adhesives and Water based PUD | |||
| 2120-55 | • | • | • | 50-60 | < 1.5 | 75°C | 800-1200 | 2050 | CASE |
| TECHNOL GRADES | Adhesives | Synthetic leather | Microcellular Foams | Flexible Foams | TPU | Coatings | PU dispersion | Hydroxyl No., mg KOH/g | Acid Value, mg KOH/g | Viscosity in cPs | Average MW | Key Applications Segments | |
| 2255 | * | 55-59 | ≤ 1.0 | 35°C | 4200-5000 | 2000 | Footwear | ||||||
| 2250 | * | 50-55 | < 0.8 | 35°C | 4500-5500 | 2150 | Footwear | ||||||
| 3272 | * | * | 70-75 | < 0.8 | 35°C | 2000-4000 | 1550 | Low Density High Hardness Footwear Sandal | |||||
| 1255B | * | * | * | 54-58 | < 0.5 | 50°C | 2000-2500 | 2050 | TPU Resins & Footwear | ||||
| 3255B | * | * | * | 54-58 | < 1.0 | 35°C | 6000-7000 | 2000 | Medium hydrolysis Improved performance of TPU Resins & Footwear | ||||
| 3160R | * | 58-63 | <1.50 | 25°C | 16000-19000 | 2500 | Flexible foam | ||||||
| 3160RLF | * | 58-63 | <1.50 | 35°C | 8500-10000 | 2500 | Low Fogging characteristics Flexible foam | ||||||
| 3160 | * | * | 58-63 | <1.60 | 25°C | 19000-24000 | 2580 | Footwear, Flexible foam and Hot Cast Elastomer | |||||
| 2245T | * | 44-48 | < 1.0 | 35°C | 6800-7800 | 2600 | Footwear | ||||||
| 2265T | * | 64-68 | < 1.0 | 35°C | 4000-4600 | 2000 | Footwear | ||||||
| 1165DB | * | 60-68 | <1.0 | 35°C | 9400-12000 | 2010 | Footwear | ||||||
| 4050T | * | 54-58 | <1.0 | 35°C | 7600-8600 | 2100 | Footwear | ||||||
| 3255AX | * | 50-58 | <1.80 | 35°C | 9500-11000 | 2700 | Improved Antiscorching for Flexible slab-stock foam | ||||||
| 4255AX | * | 50-58 | <1.0 | 25°C | 14000-16000 | 3000 | Improved hydrolysis and antiscorhing version for Flexible slab-stock foam | ||||||
| 6182AX | * | 80-85 | <1.0 | 25°C | 6500-8500 | 2000 | Improved hydrolysis and antiscorhing version for Flexible slab-stock foam | ||||||
| 3196AX | * | 195-215 | <4.0 | 25°C | 18500-27500 | 830 | Flexible slabstock foam | ||||||
| 8175 | * | 160-180 | <0.8 | 25°C | 2500-4500 | 660 | Flexible slabstock foam flame lamination | ||||||
| 2120B | * | * | * | 108-116 | < 0.5 | 75°C | 100-300 | 1000 | TPU Resins | ||||
| 2156B | * | * | * | 50-55 | < 0.5 | 60°C | 1350-1650 | 2250 | TPU Resins | ||||
| 2140B | * | * | * | 38-42 | < 0.5 | 60°C | 2700-3300 | 2800 | Adhesives and TPU | ||||
| 1156 | * | * | 54-58 | ≤ 1.0 | 75°C | 500-700 | 2000 | TPU, synthetic leather | |||||
| 4055 | * | * | 54-58 | <0.7 | 35°C | 2900-3600 | 2000 | Footwear | |||||
| 4055NP | * | * | * | 55-60 | <0.5 | 35°C | 1500-3500 | 2000 | CASE , Dispersions, UV stable | ||||
| 4256NH | * | * | * | 53-57 | <0.5 | 60°C | 6000-8000 | 2000 | Coatings, adhesives and PUD | ||||
| 4310NH | * | * | * | 106-118 | <1.0 | 75°C | 500-800 | 1200 | Coatings, adhesives and PUD | ||||
| 5255MPD | * | * | * | 55-60 | <1.0 | 35°C | 2500-400 | 2000 | Excellent hydrolysis in Coatings, adhesives and PUD and microcellular | ||||
| 5255PO | * | * | * | 55-60 | <1.0 | 35°C | 7000-8000 | 2000 | Excellent hydrolysis in Coatings, adhesives and PUD and microcellular | ||||
| 6113 | * | * | * | 55-60 | <1.0 | 35°C | 7000-8000 | 2000 | Medium hydrolysis in Coatings, adhesives and Water based PUD | ||||
| 2120-55 | * | * | * | 50-60 | < 1.5 | 75°C | 800-1200 | 2050 | CASE | ||||
In Polyurethane Application Segment, TECHNOL Aliphatic polyester polyols are mainly used in order to improve elastomeric properties in the molecular structure.
read moreAromatic saturated polyetser polyols developed for the manufacturing of Rigid PUR and Polyisocyanurate foams.
read moreTECHNOL FPA GRADE provides excellent adhesion when the application applied to co-extruded or plain biaxially oriented PP/PE film. This can also be over-coated with...
read more
We are always here to help you with your any doubt our team of experts will get back to you once you raise your comments.